Sensirion SLF3S-1300F Liquid Flow Sensor
Sensirion SLF3S-1300F Liquid Flow Sensor enables precise and reliable measurements of dynamic liquid flow rates up to 40ml/min bi-directionally. Sensirion SLF3S-1300F sensor features a digital interface (I2C) via a 6-pin standard electrical connector. SLF3S-1300F builds on the latest generation CMOSens® sensor chip that is at the heart of Sensirion's flow sensing platform and allows achieving an outstanding performance. CMOSens technology combines the sensor element, signal processing and digital calibration on a small CMOS chip. The CMOS technology is ideal for demanding and cost-sensitive OEM applications.
Features
Highly integrated: Linearized, temperature-compensated, and fully calibrated digital output signal (I2C) from a single chipFull-scale flow rate for water-based liquids: 40ml/minTurn down ratio of 200:1 or betterHigh-speed measurement: Response time below 20msBidirectional measurement and real-time failure detection
Applications
DiagnosticsLife Science and analytical instrumentsBiomedical devicesFuel cell systemsIndustrial automation
Application Notes
Cleaning and Clean HandlingSensor Fluidic Ports and Tubing ConnectionsDispense Volume or Flow Rate Correction
Kit Contents
1 pc SLF3S-1300F liquid flow sensor (prototype)1 pc SLF3x mounting clamp to enable mechanical fixation of the sensor1 pc SCC1-USB Sensor Cable with USB connector for plug-and-play connection to a PC1 pc adapter cable from 6-pin connector to 4-pin M8 which serves as link between sensor and SCC1-USB Sensor Cable, 15 cm length1 pc ribbon cable from 6-pin connector to pigtail, 30 cm lengthA set of fluidic fittingsPC Software (Viewer & Data Export Tool)
Sensirion Newest
Sensirion SLF3S-1300F Liquid Flow Sensor are available at Mouser Electronics and provides maximum safety, stability and long-term reliability for a wide range of applications.
Date: 2019-06-25Sensirion Sensor SEK-SensorBridge enables the development of sensor applications with proprietary plug-and-play hardware.
Date: 2019-05-22Sensirion SVM30 Multi-Gas, Humidity, and Temperature Sensor Combo Module is ideal for measuring indoor air quality in devices such as air purifiers, air conditioners, and other air treatment products.
Date: 2019-04-15Sensirion SEK-SVM30 Evaluation Kit features plug-and-play hardware with user-friendly viewer software to give an in-depth evaluation of the SVM30 Multi-Pixel Gas Sensor.
Date: 2019-04-08Sensirion EK-F3x-CAP Evaluation Kit is designed to provide simple and effective evaluation for sensors of the SFM3x series.
Date: 2019-02-20Sensirion SFM3xxx Series Medical Digital Flow Meters are digital mass flow meters that measure the flow rate of air, oxygen, and other non-aggressive gases with excellent accuracy.
Date: 2019-02-20Sensirion Environmental Sensor Shields feature the SHTC1 humidity and temperature sensor along with either an SGP30 or SGPC3 gas sensor.
Date: 2019-02-19Sensirion SCC30-DB Humidity Temperature Sensor Module is available at Mouser Electronics and is ideal for applications that require sensing remotely from the main control board.
Date: 2018-11-12